Add Erase DESS Keys
08.01.2013, 18:45 Description
The Keys page provides functions that you can use to add or erase DESS® keys.
The Key Usage table shows the status and, when available, the maximum RPM setting (on some 2-stroke) or type for each key.
To add a DESS key into the module
2. Click on the Keys page thumbnail.
3. Click on the Add Key button. For some vehicles, click on the Add Normal Key or Add Learning Key® button.
4. Insert a key on the MPI® DESS post (if you work with the VCK®) or * on the DESS Post Interface (if you work with MPI-2).
5. Click on the message box OK button.
6. Repeat steps 3 to 5 for each key that you want to add.
To erase a key from the module
2. Click on the Keys page thumbnail.
3. Click on the Erase Key button.
4. Insert a key on the MPI DESS post.
5. Click on the message box OK button.
6. Repeat steps 3 to 5 for each key that you want to erase.
To erase all DESS keys from the module
2. Click on the Keys page thumbnail.
3. Click on the Erase All Keys button
4. Click on the message box OK button.
Note
After erasing all keys, add at least one new DESS key into the document. If the document contains no DESS key, B.U.D.S. will refuse to write it into the module.
* - Connecting the DESS Post Interface with various vehicles.
Source : http://files.diag-systems.com/BUDS_User_Manual_EN/BUDS-User-Manual-EN.html?keys_page.html
Category: Instructions | Added by: Admin
| Tags: Add Erase DESS Keys Views: 3035 | Downloads: 0
| Rating: 0.0 0
